specification | Equipment name | UNIT | QTY | Remark |
ZJ-V5B | Hydraulic shaftless mill roll stand | a | 2 | The spindle￠240mm，hyperbola heavy rocker，toothed chuck，multi-disc ventilated disc brakes,hydraulic drive lift，left and right translation，for medium. Rail length 6000mm，trolley used 10mm plate welding. |
Paper trolle | a | 4 | ||
RG-1-900 | Preheater | a | 2 | roller￠900mm，including certificate of pressure vessel。Electromotion adjustment angle. |
SF-320E | Casstte type single facer | a | 1 | Corrugated roller ¢ 320mm, Tungsten carbide coating, electric trailer 10-minute rapid change of tile roller, energy-efficient synchronous belt rotation, maintenance-free airbag pressurization, independent coating unit, PLC automatic control plastic, man-machine interface touch screen, Paper automatic parking pressure relief. |
MK－320 | corrugated roll Quick Change modules | a | 1 | Corrugated roller diameter:320mm，tungsten carbide dealing，Modules section comprises：Both ends of the shaft seat、bearing、steam element、suction box、pneumatic components assembly. |
DY-C | Electric hydraulic quickly change trolley | a | 1 | Large capacity battery, power walking, hydraulic lift, centralized control. |
ZDF | Conveyor bridge | set | 1 | Independent frequency motor drive lifting, transmission。Main beam is connected with the 20th channel, 16-beam, No. 63 angles, columns, etc. Both sides of the security fence, the word pedals, ladders. |
DHE-150 | Single corrugated the aspect Cutter（Spiral knife Crosscutting，NC thin knife slitting,down stacking ） | a | 1 | AC servo control spiral knife structure，Touch screen display. Collect paper machine adopting a classification adjustable count output cardboard，The maximum length of stacked is 1.3 meters. pull paper feed and transverse motor is all frequency speed control, NC thin knife slitting 5 group blades。Spiral knife Crosscutting. |
u ZJ-V5B hydraulic shaftless mill roll stand
Ø structural feature：
ü Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others，the lifting of the paper adopts hydraulic drive.
ü Brake adjustable adopts multipoint braking system.
ü Every stand matched two sets paper car , and they can paper on the both sides at the same time.
Ø Technical parameters：
1、the range of clamping paper：MAX1600mm MIN1000mm 2、clamping diameters：MAX￠1500mm MIN￠350mm
3、main shaft diameter of paper holder：￠242mm 4、gas source work pressure（Mpa）：0.4---0.8Mpa
5、equipment size：Lmx4.3*Wmx1.8*Hmx1.6 6、single weight：MAX4000Kg
Ø Hydraulic system parameters：
1.Work pressure（Mpa）:16---18Mpa 2、lifting hydraulic cylinder：￠100×440mm
3.Clamping hydraulic cylinder：￠63×1300m 4、hydraulic station motor power：3KW --380V -- 50Hz
5、solenoid valve voltage：220V 50 Hz
u paper trolley, track
Ø Structural feature：
ü The whole track buried，The main frame of the 14th Channel steel with ¢ 20mm cold drawn welded round，length of track 4510mm.
ü Each paper holder matched two sets paper trolley, and paper on both sides at the same time.pull the roller paper to the right place.
Ø Mainly purchased parts, raw materials and origin：
Name of main parts | Brands or place of origin | material |
track and paper car | Tanggang or jigang | NO14channel steel、Q235A、steel strip |
bearing | HRB,ZWZ,LYC |
u RG-1-900 preheater
Ø Structural features：
ü Preheat roller accord the pressure container national standards,and enclose the pressure container certificates and inspection certificate.
ü Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable.
ü Electromotion adjustment angle, and angle can rotation adjustment the preheat area in the range of 360°.
Ø Technical parameters：
1、Effective width：1600mm 2、diameter of preheat roller：￠900mm
3、angle adjustment range：360°rotation 4、angle shaft diameter：￠110mm×2
5、steam temperature：150-180℃ 6、steam pressure：0.8-1.3Mpa
7、equipment size：Lmx3.3*Wmx1.1*Hmx1.3 8、single weight：MAX1800Kg
9、working power：380V 50Hz 10、Motor power：250W short（S2）working system
Ø Mainly purchased parts, raw materials and origin：
Name of main parts |
Steam rotation joint |
preheater |
bearing |
Seat belt bearing |
Reducer |
contactor |
Angle axis |
traps |
u SF-320E multi-cassette positive pressure single facer (Option)
※structural features：
Ø Main flute roller：￠320mm（according flute differ），pressure roller￠370mm，preheat roller￠400mm
Ø Using negative pressure type design, low heat loss，helps the core paper to press evenly and close to the surface of corrugated roller, make the corrugate molding better, pressure uniform, the top of corrugate can glue uniform and better, make the single corrugated paper have perfect laminating.
Ø Quickly change rollers in 10 minutes, while change corrugated roller with the electric trolley loading,the entire group of corrugating with motor drive，put into the machine,fixed to the machine base,only need a few buttons can complete the replacement quickly and easily.
Ø Corrugated roll adopt 48CRMO high quality alloy steel,dealing with heating, after grinding hard chrome plating surface treatment.
Ø Corrugated roll and pressure roll adopt the airbag control system with high stability, at the same time with pneumatic control buffer effect.
Ø Glue volume control with electric adjustment，rubber septum electric device，the glue system can operate independently when the motor stops,prevent glue exhausted.
Ø The moveable type glue unit is convenient to clean and maintain.
Ø Easy operation control system, touch screen operation interface,Drawing with color display operating status, function selection, fault indication, and parameter settings, etc. can exclude exhibit this machine fully functional, easy to operate, user-friendly.
Ø Built-in pre-conditioner with proportional spraying device, adjustment the core paper temperature and moisture.
Ø Main, vice corrugating and pressure roller bearings are used in high-temperature grease to ensure bearing life running smoothly.
u ZDF conveyor bridge
Ø Structural feature：
ü This part of the main frame with channel, beam, angle and so connected together.
ü other sides are equipped with safety barriers and security herringbone pedal operation face a safety ladder, ensure staff safety and ease of operation.
ü independent variable frequency motor lifting mechanism, PVC conveyor belt, a single watt of cardboard into a wavy rule stable.
ü All roller surface after grinding hard chrome plated.
ü Bridge over the auxiliary high-strength composite sheet, smooth, durable, low friction, reducing transportation resistance cardboard.
Ø Technical parameters：
1、working width：1600mm Highest height：3000mm Working speed：150m/min
2、Paper roll and tension roller： ￠130mm Conveyor roller：￠180mm
3、Single-sided corrugated lift motor：3KW （frequency） 380V 50Hz Continuous（S1）Working standard
u DHE-150 Single corrugated the aspect Cutter（Spiral knife Crosscutting，NC thin knife slitting，down stacking ）
Ø Structural features：
1、Store 200 groups of orders, the man-machine interface, the screen displays information can be found at any time, modify, append, cancel.
2、American Emerson servo motor drive controller, high-performance synchronous servo motor drive.
3、Cutting Machine adopts inlaid front steel blade structure, hardened gear grinding backlash-free transmission, high precision and long life.
4、Host wall of gray cast iron, rigidity, vibration resistance.
5、stacking adopt gantry platform lifting, Reach a certain number of right-angle transverse，Three sections of the paper，Some hair design paper roll straight bend output，Second overlapping fixed-length buffer，three part points Pneumatic separate ，Accelerated export cardboard。Improve working efficiency. The maximum length of stacked is 1.6 meters .This machine is suitable for efficient production color printing business。
6、Full servo motor control, change order fast, for a single time 1-3 seconds.
7、Using thin tungsten alloy steel knife，blade sharp，the using life is more than 8000000 meters.
8、Brothers for computer-controlled, automatic or manual knife sharpener can be divided trimming knife edge, increase productivity.
9、Imported synchronous drive system, precision accurate, long life, low operating noise.
10、From high-quality imported industrial computers and high-performance programmable controller configuration, lower computer control system.
Ø Technical parameters：
1、The maximum working width：1600mm 2、operation direction：left or right（Determined in accordance with customer plant）
3、The maximum mechanical speed：150m/min 4、Mechanical configuration：Computer spiral knife crosscutting
5、Cutting length：300-1600mm 6、Minimum slitting width：180mm
7、Precision Cutter：±1mm（Uniform） ±1.5mm(Non-uniform) 8、5 groups ￠200blades
Ø Roller diameter parameters：
1、Cross on the knife shaft diameter：￠200mm Balancing done deal
2、Cross under the knife shaft diameter：￠200mm Balancing done deal
3、Under the pull roller diameter:￠156mm Balancing done deal
Note: After all have been grinding rollers, hard chrome plated at (upper and lower arbor exception) processing.
Ø Power motors and electrical parameters：
1、Main drive motor power：12.5KW Full AC synchronous servo motors
2、Pull the paper motor power：3KW（Frequency Control）
3、Feed motor power：1.5KW(Frequency Control)
4、Transverse motor power:0.75KW(Frequency Control)
